Stationary burner - Dremel Versaflame model 2200
The Dremel VersaFlame is the ideal torch for burning and welding parts from Metal Clay and not only. Versaflame is a stationary burner powered by liquefied butane gas for quick heating and easy refueling. It safely supports an open flame, making it easy to use for various hobby applications. It is the ideal tool for burning, soldering and welding parts from Metal Clay. All you have to do is position the metal clay piece on a welding block and direct the flame over the piece. Throughout the burn, make circular motions to evenly distribute the heat and make sure the part is burned correctly. Burning time and temperature differ depending on the type of metal clay.With a weight of only 230 gr, this burner is easy to handle, can be used either manually or statically, in an upright position by fixing it in the special support. You can set 3 temperature levels, from 550 degrees to 1200 degrees Celsius, depending on the material and the type of work for which it is used.
Ignition is done by pressing a button. The tank has a capacity of 22 g, which will guarantee a burning time of up to 75 minutes.
Ignition is done by pressing a button. The tank has a capacity of 22 g, which will guarantee a burning time of up to 75 minutes.
The burner is provided with a safety system, respectively an obstacle that does not allow the accidental ignition of the flame. In addition, this obstacle also serves to block the ignition button during combustion, so that the flame stays lit continuously.
The product is packed in a cardboard box and comes with the following accessories:
- Catalyst
- Soldering tip
- Flame extension piece
- Deflector
- Soldering tin
- Soldering sponge and box
- Key
Technical specifications:
- Ignition: Piezo (Piezoelectric)
- Burning time: 75 min.
- Tank capacity: 42 ml / 22 g
- Temperature: 3 steps; 1200 ° C (open air) 680 - 1000 ° C (hot air) 550 ° C (peaks)
- Weight0.227 kg
- Length: 17 cm
- Width: 6 cm
- Depth: 11 cm
- Color: Silver
NOTE: The kit does NOT contain liquefied gas spray for charging.
ATTENTION: THE PRODUCT IS NOT SOLD LOADED WITH GAS!
Careful! When ignited, point the torch in the opposite direction to you or any flammable material.
After use DO NOT touch the metal tip of the burner, this part is very hot and will cause severe burns! During cooling, keep away from children, animals and flammable materials.
Keep away from children, even if the igniter is equipped with a safety barrier to prevent their use, there may be unwanted accidents!
Orit -
A practical and necessary tool.